Datalogic Applications
114 Skorpio™ X4
To open a configuration or to connect to a device which requires
authentication:
1. Open a configuration file or load the configuration from a
connected device.
2. Type the user name for this configuration/device into the User
Name field.
3. Type the password for this configuration/device in the Password
field.
4. Click OK.
Edit a Configuration File Off-line
You can edit configuration files even when the device they were
drawn from are not connected to DXU. Follow the steps below:
1. Open your configuration file.
2. Edit any settings you wish.
3. Either save the result to a new configuration file, or just save to
the same configuration file.
Add Comments to Configuration Settings
Comments can be added to any tab, node, or parameter in the Device
Configuration window. Comments are indicated with a small text
balloon icon.
To Next Page
Loading...
