Datalogic Skorpio - Page 4

Skorpio Handheld Informaon
3
FOR AN UNRESPONSIVE OR IMPROPERLY RESPONDING HANDHELD
If the handheld does not respond properly, it may need a reboot. Perform a warm boot rst and see if
that xes the problem. If it does not, then perform a cold boot.
WARM BOOTING THE HANDHELD
To perform a Warm Boot press the Yellow, Blue, and the ESC keys simultaneously.
COLD BOOT THE HANDHELD WARNING: THIS WILL REQUIRE A REINSTALL AND RE-SETUP OF
THE HANDHELD
1. Turn o the Skorpio X3 by pressing the ON/OFF Power buon.
2. Pull the baery latch down and remove the baery pack.
3. Simultaneously press the SCAN key and the Reset buon in the baery compartment.
4. Insert the baery pack.
5. Turn on the Skorpio X3 by pressing the ON/OFF Power buon.