Datalogic Skorpio - Page 3

Skorpio Handheld Informaon
2
WINDOWS MOBILE DEVICE CENTER INSTALLATION (FOR WINDOWS VISTA OR
NEWER)
1. Locate a copy of the latest version of Windows Mobile Device Center for your computer
system. The correct version is available from Microso’s WEB site or a copy is included in your
download.
2. Look for the installaon le (i.e. drvupdate-x86.exe) and run it. We recommend that you follow
the installaon instrucons and accept the standard default sengs during your install.
INSTALL USB DRIVER
BEFORE connecng the handheld computer to a host USB port for the rst me, you must install the
USB driver provided with the handheld computer on your PC. This will likely be downloaded from the
WEB. Complete the driver installaon as instructed during the installaon procedure. (NOTE: Some
handheld models may not require a driver to be loaded. Refer to the installaon instrucons.)
Connect the USB cable to your PC and the handheld or docking staon (if provided). Windows will
locate the hardware and complete the installaon.
INSTALL GIGATRAK HAN DHELD APPLICATION
The handheld applicaon can be found in the Handheld folder of your installaon download.
1. Connect the handheld docking staon to your computer (typically a USB connecon) and plug
in the AC power cable.
2. Put the handheld in the dock and wait for it to sync with the PC.
3. On the PC, double-click the handheld setup le for the applicaon you are installing (e.g.,
setup_memor_hh.exe).
ADD A SHORTCUT TO YO UR HANDHELD DESKTOP
1. Exit the applicaon if it is running.
2. Double tap the 'My Device' icon on the desktop.
3. Double tap the 'FlashDisk' icon.
4. Scroll down to the GigaTrak applicaon icon (e.g., WIN-TTS).
5. Hold your stylus down on the icon unl a pop-up menu appears.
6. Select 'Copy' on the menu.
7. Close the window to go back to the desktop.
8. Hold down the stylus on the desktop unl a pop-up menu appears.
9. Select 'Paste Shortcut' from the menu.