Datamax I-class series - Page 35

I-Class
Printer Options (continued)
Menu Item Details
START OF PRINT
Selects the type of input signal required to initiate
printing, where:
ACTIVE HIGH
Triggers printing
with a high signal.
EDGE Triggers printing with a signal edge transition.
LOW PULSE Triggers printing with a low pulse.
HIGH PULSE Triggers printing with a high pulse.
ACTIVE LOW Triggers printing with a low signal.
END OF PRINT
Sets the type of output signal generated to indicate End
of Print (EOP), where:
LOW PULSE
Ou
tputs a low pulse upon completion.
HIGH PULSE Outputs a high pulse upon completion.
ACTIVE LOW Outputs a logic low upon completion.
ACTIVE HIGH Outputs a logic high upon completion.
RIBBON LOW
Sets the low ribbon signal (as determined by RIBBON
LOW OPTIONS; see Section 4.2.2), where:
ACTIVE LOW
Outputs a
logic low when the roll reaches the setting.
ACTIVE HIGH Outputs a logic high when the roll reaches the setting.
SLEW ENABLE
Selects the type of input signal required to initiate label
slew, where:
STANDARD
Triggers slew with a low signal.
LOW PULSE Triggers slew with a low pulse.
HIGH PULSE Triggers slew with a high pulse.
ACTIVE LOW Triggers slew with a low signal.
ACTIVE HIGH Triggers slew with a high signal.