Need help?Do you have a question about the Datamax I-Class Mark II and is the answer not in the manual?
Procedures for loading media rolls, ribbons, and adjusting the media sensor.
Detailed procedures for quick, empty, standard, and advanced media calibration.
Recommended cleaning schedules and step-by-step cleaning instructions for the printer.
A comprehensive table listing common printer problems and their solutions.
Guides for configuring wireless connections in infrastructure and ad-hoc modes.
Step-by-step instructions for installing the printer driver on Windows.
General| Power Supply | 100-240 VAC, 50-60 Hz |
|---|---|
| Print Resolution | 203 dpi |
| Print Width | 4.09 inches |
| Memory | 16 MB DRAM, 8 MB Flash |
| Connectivity | USB, Serial, Ethernet |
| Media Handling | Roll-fed |
| Media Width | 1.0" – 4.65" (25.4 mm – 118 mm) |
| Media Thickness | 0.0025" – 0.010" (0.0635 mm – 0.254 mm) |
| Ribbon Width | 1.0" – 4.5" (25.4 mm – 114.3 mm) |
| Ribbon Length | 1968 feet (600 meters) |
| Print Speed | up to 12 ips |
| Dimensions | 12.7" H x 12.6" W x 18.6" D (322.6 mm H x 320 mm W x 472.4 mm D) |
To Next Page
