Datamax I-Class Mark II User Manual

Chapter 3 - Printer Operation 17
3
3
3
.
.
.
2
2
2
W
W
W
i
i
i
n
n
n
d
d
d
o
o
o
w
w
w
s
s
s
D
D
D
r
r
r
i
i
i
v
v
v
e
e
e
r
r
r
The Windows driver is located on the Accessories CD-Rom included with your printer. For the latest
version please visit our web site at www.datamax-oneil.com.

Be sure your printer’s firmware version is 10.03_0016B or greater. Firmware is available from our
website, for the latest version please visit our web site at http://www.datamax-oneil.com

Be sure your printer’s USB Mode is set to “Printer”. This mode can be viewed/changed via the
printer’s front panel menu under: Communications> USB Port> USB Device Class.
Installing the Windows Driver:
Place the Accessories CD-Rom included with
your printer into your computers CD-Rom drive.
Once the CD-Rom starts select "Install Windows
Driver" from the main menu and follow the
instructions on the screen to install.
When prompted, select your printer from the
list, (i.e. Datamax-O’Neil I-Class MarkII).
Continue to follow the on-screen instructions to
install the driver.

Datamax I-Class Mark II Specifications

General

Power Supply	100-240 VAC, 50-60 Hz
Print Resolution	203 dpi
Print Width	4.09 inches
Memory	16 MB DRAM, 8 MB Flash
Connectivity	USB, Serial, Ethernet
Media Handling	Roll-fed
Media Width	1.0" – 4.65" (25.4 mm – 118 mm)
Media Thickness	0.0025" – 0.010" (0.0635 mm – 0.254 mm)
Ribbon Width	1.0" – 4.5" (25.4 mm – 114.3 mm)
Ribbon Length	1968 feet (600 meters)
Print Speed	up to 12 ips
Dimensions	12.7" H x 12.6" W x 18.6" D (322.6 mm H x 320 mm W x 472.4 mm D)