Need help?Do you have a question about the Datamax I-Class and is the answer not in the manual?
General| Print Method | Thermal Transfer/Direct Thermal |
|---|---|
| Resolution | 203 dpi, 300 dpi, or 600 dpi |
| Max Print Speed | 10 inches per second (254 mm/s) |
| Interface | USB, Serial, Parallel |
| Media Types | Paper, Polyester, Polypropylene, Vinyl, Nylon |
Settings to maximize scanning and decoding speed for high throughput applications.
Settings to maximize scanning and decoding integrity for accuracy and data security.
Explains the 'MODE' setting for scanner detection (Enabled, Disabled, Auto).
Details the 'BARCODES' setting for enabling specific symbologies and lists supported types.
Setting to define the number of bar codes to read per label, with Auto Mode.
Setting for bar code integrity based on vertical distance and consecutive reads.
Setting for bar code integrity by specifying required redundant reads.
Function to restore all scanner settings back to their original factory default values.
Determines scanner actions and operator interaction when a fault is detected.
Explains how specular reflection affects scanner performance and provides steps to reduce it.
Provides troubleshooting steps for when the scanner fails to read a barcode successfully.
Outlines the process for returning a defective unit and obtaining warranty service.
States Datamax-O'Neil's warranty limitations regarding design, capability, suitability, and software.
Defines the extent of Datamax-O'Neil's liability for indirect, special, or consequential damages.
To Next Page
