10
Specifications
Physical
Case Material Steel (Black)
Dimensions (L x H x W)
47 x 20 x 55 mm (1.95 x 0.78 x 2.2 in)
Cable Length 7.0 inches with 8 pin Mini DIN connection
Mini DIN Connector Pin Number: Signal:
MD-80
8-pin Mini DIN Connector
1 +5 VDC
2 TXD
3 Trigger
4 RTS
5 Signal Ground
6 Chassis Ground
7 RXD
8 CTS
Optical
Scan Rate 700 scans per second ±10%
Wavelength of LED Illumination 660 nanometers
Read Sensor CCD linear array
Narrow Bar Resolution 10.0 mil
Maximum Character Input 51 digits
Maximum Scanning Width 4.0 inches
Minimum Print Contrast Signal 0.45 (min. background reflectance of 70%)
Symbology Orientation Picket fence
Electrical
Operating Voltage +5 VDC + 5%
Current:
Operating 158 mA typical, 220 mA maximum
Static 150 mA maximum
Surge 3 A maximum
Environmental
Temperature:
Operating
0 to +40 C (+32 to +104 F)
Storage
-10 to +60 C (+14 to +140 F)
Humidity (non-condensing):
Operating 20 to 80%
Storage 20 to 90%
Ambient light restrictions: Fluorescent or incandescent: below 5 kilolux
Supported Symbologies
Codabar (NW-7) Code 39 Code 93
Code 128 Industrial 2 of 5 Interleaved 2 of 5
MSI / Plessey WPC (UPC / EAN / JAN) IATA
Supported Printers*
I-4208, I-4212, I-4308, I-4406, and I-4604
*With installed firmware versions of 7.03 and above.
To Next Page
Loading...
