Need help?Do you have a question about the Datamax M-Class Mark II and is the answer not in the manual?
General| Media Sensor | Adjustable reflective and transmissive sensors |
|---|---|
| Print Method | Thermal Transfer |
| Print Resolution | 203 dpi |
| Memory | 8 MB Flash, 16 MB SDRAM |
| Interface Options | USB, Serial, Ethernet, Parallel |
| Media Type | Roll-fed, die-cut, continuous, fan-fold, tags, ticket stock |
| Media Width | 1.0 in (25.4 mm) to 4.65 in (118 mm) |
| Media Thickness | 0.0025 in (0.0635 mm) to 0.010 in (0.254 mm) |
| Media Roll Diameter | 8 inches (203 mm) max |
| Ribbon Width | 1 to 4.33 inches (25.4 to 110 mm) |
| Ribbon Length | 1968 ft (600 m) |
| Ribbon Core | 1 inch (25.4 mm) |
| Label Width Range | 1.0 in (25.4 mm) to 4.65 in (118 mm) |
| Label Length Range | 0.25 to 39 inches (6.35 to 991 mm) |
Description of lights and buttons on basic printer models.
Explanation of the interface for printers with a graphic display.
Procedures for calibrating the printer's media sensing system.
Overview of the printer's menu structure and navigation.
Tools for testing printer functions and reporting status.
Settings for interface and host control functions.
Recommended maintenance schedule for printer parts.
Procedures for cleaning the printhead to ensure print quality.
Adjusting pressure for even printing on different media widths.
Fine-tuning printhead alignment for optimal print quality.
Adjusting printhead pressure for various media types.
Step-by-step guide for replacing a damaged printhead.
Matching print contrast after printhead replacement.
Table of common problems and their solutions.
Explanation of error and warning messages and their remedies.
To Next Page
