Datamax I-class series - Page 40

I-Class
System Settings (continued)
Menu Item Details
PEEL MODE
Allows the SOP signal to initiate (via GPIO option) the
feeding of the labels, where:
DISABLED
Feeds regardless of SOP.
ENABLED Feeds only when SOP is received.
SECURITY
Allows menu password protection, where:
SELECT SECURITY Enables or disables the security feature, where:
 Note: The default password must be changed to
activate.
DISABLED
Allows entry.
SECURE MENU Sets a password requirement for menu entry.
MENU AND TEST
Sets a password requirement for menu and test
entries.
MODIFY PASSWORD
Modifies the four-digit password required when security
is enabled, where:
MODIFY PASSWORD?
CANCEL KEY = YES
Enters the password (after confirmation); otherwise,
press the ESC Key to keep the current password.
 Note: The default password is 0000.
UNITS OF MEASURE Sets the measurement standard for the printer, where:
IMPERIAL
Uses inches.
METRIC Uses millimeters and centimeters.
INPUT MODE
Defines the type of processing that occurs when data is
received, where:
DPL Processes data for standard DPL printing; see the Class
Series 2 Programmer’s Manual.
LINE
Processes data for template (Line Mode) printing; see
the Class Series 2 Programmer’s Manual.