I-Class
Communications (continued)
Menu Item Details
MTU Sets the Maximum Transmission Unit packet size,
where:
01500
(512 - 65515)
Is the packet size, in bytes.
GRATUITOUS ARP Sets the Address Resolution Protocol notification rate,
where:
0000 (0 - 2048)
Is the time, in minutes.
PORT NUMBER Sets the network communications port, where:
09100 (1 - 65535)
Is the Port Number.
DUPLEX CAPABILITY Sets the communication capability for the Wired
network, where:
AUTO-NEGOTIATE
Automatically selects the best type.
100BASET HALF
Selects 100 Mb half duplex (in both directions, one way
at a time) operation.
100BASET FULL
Selects 100 Mb full duplex (in both directions,
simultaneously) operation.
10BASET HALF
Selects 10 Mb half duplex (in both directions, one way
at a time) operation.
10BASET FULL
Selects 10 Mb full duplex (in both directions,
simultaneously) operation.
ADVERTISE CAPABILITY Transmits the printer’s communication capability for
the Wired network, where:
AUTOMATIC Advertises the DUPLEX CAPABILITY set value.
ALL CAPABILITIES Advertises all possible values for DUPLEX CAPABILITY.
NETWORK REPORT
Prints a network status report (see example below):
NETWORK REPORT
CURRENT PRINTER INFO
MACO: 00:0D:70:0B:8B B9
IP ADDRESS: 192.168.10.26
SUBNET MASK: 255.255 255.0
GATEWAY: 192.168.10 26
DHCP: ENABLED
SNMP: ENABLED
PORT NUMBER: 9100
NETBIOS NAME: DMX_000000
WLAN MODULE
MODULE FW VERSION: 4.3.0.24
RADIO FW VERSION: 1.1.1.111.8.4.0.145
PORT STATUS: CONNECTED: ADHOC
SSID: any
MACR: 00 90:C9:01:D0 64
BSS ADDRESS: PROVIDED BY DHCP
To Next Page
Loading...
