Datamax I-class series - 5.4 Printhead Assembly Adjustments

I-Class
5.4 Printhead Assembly Adjustments
Mechanical adjustments ens
ure consistent print quality across a wide range of media types
and sizes.
5.4.1 Leveling Cam Adjustment
Adjust the Leveling Cam for even pressure distribution when using less than full width
media [4 inches (102mm)]; in addition, perform the adjustment when changing to a
different width of media:
A. With media loaded, download a batch of labels (or use a test format) and begin printing.
B. While observing the printed labels, rotate the Leveling Cam counter-clockwise to an
over-adjusted position (see Example 1).
C
. Rotate the Leveling Cam clockwise, one click at a time, until the printed labels contain a
complete, even image (see Example 2).
Example 1
–
Too much adjustment produces an image that fades across the
label.