Unpacking
Your packing box should contain the following items:
• VisionSC-HD4+ - Quad HDMI video capture card and depending on which model ordered, either:
• 2 x HDMI splitter cables, or
• 2 x DVI splitter cables
8
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its
packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satised with the
capture card and it is fully installed and working correctly. We also recommend that you make a note
of the serial number of the card in a prominent place before the card is plugged into the computer.
This should hasten any query should you need to contact our Technical Support
Department. The serial number is displayed on the card itself and the box label.
Fig.3
To Next Page
Loading...
Need help?
General
