Datapath VisionSC-HD4+ - Introduction

Introduction
The VisionSC-HD4+ has four on board video capture channels; two channels of HDMI 1.4 oering
3840x2160 @ 30 frames per second (fps) and two HDMI 1.3 channels oering 1920x1080 @60fps, all
operating independently of each other. This enables four separate video sources to be captured and
controlled simultaneously. The VisionSC-HD4+ card also has embedded audio support across all four
channels.
Key Features
LiveStream Technology
• Low latency video and audio capture minimizes the delay prior to post processing
MultiStream
• Open and independently control multiple instances of the same capture from a single input source
Powerful hardware scaler
• Adjust the incoming video size to your requirements
Text and bitmap overlay
• Overlay text and images onto the capture buer
Automatic video signal detection
• Accurate signal detection for all signal sources.
3