Page 13
When opened, the display wall tab shows a live representation of the physical wall
and the sources available to display on it. To place a source on the video wall, simply
click on the required source in the sources tab and drag it onto the display wall
representation. (Note: It is not possible to drag Application sources, double click to
open).
be selected, how to use and create templates and how to save, recall and share
Click on the display wall representation (2) as shown on the previous illustration, to
open the display wall tab.
Sources
Display Wall
Tab
Display Wall
The WallControl 10 - Security Administration Client (Only Available
with WallControl 10 Pro)
Start | All Programs | WallControl 10 - Security Administration Client
A WallControl 10-Pro serial dongle must be inserted into a vacant USB port. If the
dongle is removed or swapped, the Security Client will not open and an error
message is displayed, therefore it is important the dongle is not removed.
If you have purchased WallControl 10 Pro, the licence dongle can be located in the
accessories box.
To Next Page
Loading...
Need help?
General
