Dataprobe iBoot-G2 User Manual

Web Enabled
Power Switch
V110120E
1. Table of Contents
2.
 Important Safety Instructions………… 2 
3.  General Description………..…………. 3 
4.  Hardware Installation………..……….. 4 
5.  Initial Configuration………..…………. 5 
6.  Web Browser Operation………...…… 8 
7.  Web Setup………..……………..……. 10
8.
 Command Line Interface……..…...… 14 
9.  DxP Protocol………..…………...…… 18 
10.  Firmware Upgrades………..………... 18 
11.  Troubleshooting………..……...…..… 19 
12.  Specifications………..……………..… 20 
13.  Technical Support and Warranty…… 21 
Congratulations on purchasing the best network
controlled power switch available. The iBoot-G2
provides you the ability to reboot crashed
devices with the click of a mouse. Be sure to
read up on all the features of the iBoot-G2
Including:
• Web Based setup and control
• Telnet setup and control
• Event Scheduling for real-time power
control.
• AutoPing: Automatic monitoring and action
for failed equipment.
• Management Utility: Easy Setup,
Firmware upgrades and Reset to Factory
Default
• Easy Software Integration: Use the DxP
Protocol to build your own custom
applications
.

Dataprobe iBoot-G2 Specifications

General

Brand	Dataprobe
Model	iBoot-G2
Category	Switch
Language	English

Summary

Important Safety Instructions

Hardware Installation

Ethernet Connections

Explains how to connect the iBoot-G2 via Ethernet, including LED indicators.

AC Power Connections

Details connecting the iBoot-G2 to power and controlled devices.

Initial Configuration

Change the IP Address

Instructions for changing the iBoot-G2's IP address using the DMU.

Web Browser Operation

Password Protection

Explains the two sets of credentials (User and Admin) for access.

Control and Status Page

Details the main control interface, power status, and AutoPing status display.

Web Setup

Device Settings

Network Settings

AutoPing Introduction

AutoPing Settings

Passwords

Command Line Interface

To access the CLI

iBoot-G2 CLI Syntax

Firmware Upgrades

Troubleshooting