Web Enabled
Power Switch
V110120E
1. Table of Contents
2.
Important Safety Instructions .................. 2
3.
General Description ................................ 3
4.
Hardware Installation .............................. 5
5.
Initial Configuration ................................. 9
6.
Web Browser Operation ........................ 11
7.
Web Setup ............................................ 13
8.
Command Line Interface ....................... 20
9.
DxP Protocol ......................................... 25
10.
Firmware Upgrades ............................... 25
11.
Troubleshooting .................................... 26
12.
Specifications ........................................ 27
13.
Technical Support and Warranty .......... 28
Congratulations on purchasing the best network
controlled power switch available. The iBoot-G2+
provides you the ability to reboot crashed devices
with the click of a mouse. Be sure to read up on all
the features of the iBoot-G2+ Including:
• Web Based setup and control
• Telnet setup and control
• Event Scheduling: Set power actions on regular
intervals
• Expansion: Add low cost iBoot-EXP units for up to
three outlets controlled
• AutoPing: Automatic monitoring and action for failed
equipment.
• I/O Control: Control or Monitor your own digital Inputs
and Outputs
• Management Utility: Easy Setup, Firmware upgrades
and Reset to Factory Default
• Easy Software Integration: Use the DxP Protocol to
build your own custom applications.
To Next Page
Need help?
General
