Dataprobe iBoot - User Manual

iBoot
Web Enabled Remote Power Control
Table of Contents
Important Safety Information 2
General Description 3
Auto-Ping
Hardware Installation 5
Ethernet Connections
A/C Power Connections
iBoot Configuration 9
Setting IP Address
Using DHCP
Using Web Browser Access
Using ibootrst.exe
Using ARP / Ping
Web Browser Operation 12
Password Protection
Control & Status Page
Setup Page
Passwords Page
Forgotten Password
Program Control 17
Direct TCP Control 17
User Settings 17
Specifications 18
Tech Support & Warranty 19
More Power Control Solutions 20
Rev: 1.5
11 Park Place / Paramus, NJ 07652
201-967-9300 www.dataprobe.com

Summary

Safety Instructions

Auto-Ping Functionality

Hardware Installation

Ethernet Connections

AC Power Connections

iBoot Configuration

IP Address Configuration via DHCP

Automatically assigns IP address, Subnet Mask, and Gateway via DHCP server for iBoot.

IP Address Configuration via Web Browser

Configures the iBoot's IP address by accessing it through a web browser and the Setup page.

Web Browser Operation

Web Browser Password Protection

Details the two-password system for iBoot access and the default credentials.

Web Interface Control & Status

Explains the main interface for monitoring power status and controlling power ON/OFF/Cycle.

Setup Page

Network IP Address Settings

Manage network settings including IP address, subnet mask, gateway, and HTTP port.

Auto-Ping Monitoring Configuration

Password Management

Password Reset Procedure

Remote Control via ibootctl.exe

Direct TCP;Telnet Network Control

Technical Support and Warranty

Product Warranty Terms & Conditions

Dataprobe iBoot Specifications