EasyManuals Logo

Dataprobe iBoot User Manual

Dataprobe iBoot
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
iBoot Ver 1.5 Page 3
General Description
The iBoot is a network attached, IP addressed, Web Controlled
AC power switch. Anyone with a web browser can access iBoot
to perform power On, Off or Reboot (timed power shutdown).
iBoot is password protected for security.
iBoot uses international standard IEC320 Connections and is
selectable from 115VAC or 230VAC. iBoot handles circuits up to
12 Amps (10 Amps at 230VAC).
Uses for iBoot:
Remote reboot of any device, routers, servers, kiosks, etc.
The device to be rebooted need not be network attached.
Secure sensitive devices by keeping them powered off when
not in use. This prevents hackers from seeing them at all
times.
Power down equipment when not needed for power savings
and to save on wear and tear.
Power up alert devices like sirens, lamps, messages; or
control environmental system like heaters, coolers pumps,
etc.
Uplink
Downlink
Pwr Out
PC with
Web Browser
Inter- or
Intra- Net
10/100
Ethernet
Pwr In
iBoot
Web Controlled
Power Switch

Other manuals for Dataprobe iBoot

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dataprobe iBoot and is the answer not in the manual?

Dataprobe iBoot Specifications

General IconGeneral
BrandDataprobe
ModeliBoot
CategorySwitch
LanguageEnglish

Related product manuals