Dataprobe iBoot-G2 Manual&Nbsp;

Web Enabled
Power Switch
01/08/2013
1. Table of Contents
1.
 Table of Contents 1 
2.  Important Safety Instructions 2 
3.  General Description 3 
4.  Hardware Installation 4 
5.  Initial Configuration 6 
6.  Web Browser Operation 8 
7.  Web Setup 10 
8.  Command Line Interface 15 
9.  DxP Protocol 19 
10.  Firmware Upgrades 19 
11.  Troubleshooting 20 
12.  Specifications 21 
13.  Technical Support and Warranty 22 
Congratulations on purchasing the best network
controlled power switch available. The iBoot-G2
provides you the ability to reboot crashed
devices with the click of a mouse. Be sure to
read up on all the features of the iBoot-G2
Including:
 Web Based setup and control
 Telnet setup and control
 Event Scheduling for real-time power
control.
 AutoPing: Automatic monitoring and action
for failed equipment.
 Management Utility: Easy Setup,
Firmware upgrades and Reset to Factory
Default
 Easy Software Integration: Use the DxP
Protocol to build your own custom
applications
.

Dataprobe iBoot-G2 Specifications

General

Brand	Dataprobe
Model	iBoot-G2
Category	Switch
Language	English