V110120E iBoot-G2+ Page 12
its original condition. To abort a power cycle, select the desired outlet and click on either Power On or Power
Off buttons. iBoot-G2+ will assume the status selected.
Expansion Set for Independent I/O Mode:
The Control and Status page will display the Main
Outlet, with power control buttons underneath. The
status of Exp1 and Exp2 Inputs and Outlets are
displayed beneath the Main Power. To control the
power, or to change the status of Exp1 or Exp2, select
the appropriate button.
AutoPing Enabled:
If the AutoPing features is in use, the page will also
display the current status, OK or Failed, for each
AutoPing used, with a counter showing how many times the Action was
triggered. If connecting with the Admin credentials, reset buttons for the
Trigger counters are provided.
Heartbeat Enabled:
If the Heartbeat feature is enabled, the page will display the current status,
OK or Fail of the Heartbeat, with a counter showing how many times the
Action was triggered. If connecting with the Admin credentials, reset buttons
for the Trigger counters are provided.
Navigation Buttons:
Refresh: Use the Refresh button to obtain the latest status of iBoot. Using your browser's refresh button can
lead to inadvertent power switching. If an NTP server is being used, the time of the last refresh will be shown
in the upper right corner.
Setup: To access the Setup page, the administrator credentials must be used for the initial login.
Logout: When you are finished with iBoot, click on
Logout. A confirmation page will be displayed.
If another user is logged into the iBoot-G2, an In
Use page will be displayed.
To Next Page
Loading...
Need help?
General
