Dataprobe iBoot - Auto-Ping Functionality

iBoot Page 4
Auto-Ping
The Auto-Ping feature allows iBoot to automatically detect failed
equipment and perform a timed reboot or other power control
function (like turning on an indicator or siren). You set any IP
address to be periodically Ping'ed. When iBoot no longer
detects a response from the address, the programmed power
control function is actuated.
♦ Use Auto-Ping Locally: Put iBoot next to the device to be
monitored and reboot it automatically when it no longer
responds.
♦ Use Auto-Ping Remotely: Put iBoot at a central facility to
monitor a remote system and power up an alert when the
remote device no longer responds.
Uplink
Downlink
Pwr Out
Pwr In
Local Ping
Example:
iBoot monitors local device
and automatically reboots
it if there is no response
Ping
Response
Uplink
Downlink
Pwr Out
Pwr In
Ping
Response
Remote Ping
Example 1:
iBoot monitors network
connection and reboots
when there is no response
Example 2:
iBoot monitors remote
device and powers up
alarm when there is
no response
Inter- or
Intra- Net
Uplink
Downlink
Pwr Out
Pwr In
Response
Ping