BWS-T2 Series Instructions manual
2
1. INTRODUCTION
The BWS-T2 is an essential part of a photoelectric installation whose
purpose is to maintain a safe environment in potentially dangerous
areas where electrical machinery or equipment is in operation. It
performs this task by not allowing such machinery to start up unless the
dangerous area is clear of any persons or objects.
The product is designed to satisfy the following specifications (German
normatives):
The BWS-T2 can be used in the below listed insustrial sectors.
We inform that eventually other normatives and rules of local bodies for
safety at work have to be respected.
• Cold treatment of metals
prEN692 Mechanic presses
prEN693 Hydraulic presses
• Machinery for plastics and rubber
prEN201 Injection presses - moulding maschinery
prEN289 Shape- and moulding presses
prEN1114 Rail- and extrouding presses
prEN1417 Equipment for mixing with 2 cylinders
prEN422 Blow- shaping machinery
• Machinery for packaging
prEN415-2 Machinery for packaging of rigid prechaped goods
prEN415-3 Machinery for packaging, filling and enclosure
prEN415-4 Equipment for palleting and unpalleting
prEN415-5 Machinery for wraping
prEN415-6 Group packing machinery
prEN415-7 Machinery for arrangements
To Next Page
Loading...
Need help?
General