Need help?Do you have a question about the Datavideo DAC-50S and is the answer not in the manual?
General| Output Video Format | HDMI, SDI |
|---|---|
| HDMI Compliance | HDMI 1.3 |
| Power Consumption | 5W |
| Input Video Format | HDMI, SDI |
| Video Resolution | 1080p, 1080i, 720p, 576i, 480i |
| Audio Input | Embedded Audio |
| Audio Output | Embedded Audio |
| Power Supply | 12V DC |
| SDI Compliance | SMPTE 259M, SMPTE 292M |
| SDI Bit Rates | 270 Mbps, 1.485 Gbps, 2.97 Gbps |
| Operating Temperature | 0 to 40 °C |
Device compliance with FCC rules, subject to two conditions for operation.
Essential safety guidelines and operating precautions for the device to prevent damage or injury.
Covers manufacturing defects for one year from purchase, requiring proof of purchase.
Offers an additional year extension for registered products, with specific part limitations.
Explains the DAC-50S's function in converting HD/SD-SDI to analog video and audio.
Lists key capabilities like format conversion, output options, and rugged construction.
Details the input/output ports and the DIP switch section on the rear of the unit.
Explains the system I/O settings configured via the 8-pin DIP switch.
Describes the video and audio output ports located on the front of the DAC-50S.
Step-by-step guide for updating the device firmware via a USB connection to a PC.
Instructions for updating the FPGA firmware using a mini-USB cable and PC.
Addresses common issues, such as color bar noise and its solution.
Provides physical measurements of the DAC-50S unit in millimeters.
Details input/output interfaces, formats, DIP switch functions, power, dimensions, and weight.
Offers contact information and resources for technical assistance and product support.
To Next Page
