Datavideo TP-300 - TP-300 Packing List and Components

5
Packing List
Item
Description
Quantity
A
Prompter Frame
1
B
Hex Tools to tighten Frame screws
2
C
Metal 3/8" to 1/4" adaptor screw for tripod plate
This item screws into one of the larger holes on the bottom of the
prompter frame to make it compatible with a standard 1/4" screw on a
tripod plate.
1
D
Mounting Bracket Screw secures item E to A
1
E
Expandable mounting bracket for tablet
1
F
Glass Frame with matching Velcro straps
1
G
Wing nut screws for securing the Glass Frame
2
H
Cloth Snood/Hood including side curtains and Velcro straps
1
I
60/40 Mirror Glass with Green and Red sticker
1
J
Snood/Hood support wire
1
K
Camera Riser Blocks 15mm thick
2
L
3mm Hex Block Screw long
2
M
2.5mm Hex Block Screw Short
2
N
Camera Riser Screw Long
1
O
Camera Riser Screw Short with two washers and nut
1
P
Instruction Manual
1
NOTE: Depending on your order, your TP-300 kit could have been supplied with one of the following
optional remote controls:
 Wired remote for Android™ or iOS™ devices with a headset jack input.
 Bluetooth Wireless remote for Android™ or iOS™ devices.
NOTE: The foam packing within the retail carton has been designed so that it can be easily
transferred to an optional hard case for this kit.
Please speak with your supplier or dealer if you wish to purchase an optional remote control or hard
case for your prompter kit.