Fiscal Printer DATECS FP-2000 Version 3.10
DD-MM-YYYY
59H (89) PROGRAMMING THE PRODUCTION TEST AREA
Data field: <Test>
Response: Result,Free
Test One byte. If ‘T’ an entry into the fiscal memory is done - otherwise there will be no ‘save’
performed and only the parameters will be returned.
Result One byte:
‘P’ No error
‘F’ Error
Free The number of the free blocks left for saving such entries - 4 bytes.
The command is executed for testing the fiscal memory.
Test block for entries into the fiscal memory: 55h,AAh,33h,CCh,5Ah, A5h,3Ch,C3h
If- and when- the S1.1 flag has been raised the fiscal memory has not been formatted or is in the READONLY
mode.
5AH (90) RETURNS DIAGONSTIC INFORMATION
Data field: <Calc>
Response: <Name>,<FwRev><Sp><FwDate><Sp><FwTime>,<Chk>,<Sw>,<Ser>,<FM>
Calc If ’1’ the control sum of the fiscal memory is calculated - 1 byte.
Name Name of the printer (the string “FP2000”).
FwRev The version of the software program - 4 bytes.
Sp Space - 1 byte.
FwDate The date of the software program DDMmmmYY - 8 bytes.
Sp Space - 1 byte.
FwTime Hour of the software program HHMM - 4 bytes.
Chk The EPROM control sum - a 4 bytes string in the hexadecimal code. For example if the control
sum is 214Ah it will be presented as 32h, 31h, 34h, 42h
Sw The configuration switches from Sw1 to Sw4 - a 4 bytes string with ‘0’ or ‘1’.
Ser The serial number - 8 bytes.
FM Number of the fiscal module - 8 bytes.
5BH (91) PROGRAMMING THE SERIAL NUMBER AND FISCAL MEMORY NUMBER
Data field: <SerialNum>,<FiscalNum>
Response: Result,CountryStr
SerialNum The serial number. 10 symbols – 2 letters and 8 digits.
FiscalNum The fiscal memory number. 10 symbols – all digits.
Result One byte. ‘P’ - OK; ‘F’ - errors.
CountryStr The name of the country. For example: “ALBANIA”
The command is permitted only in service mode and is performed by the manufacturer of the printer. The printer is
handed over to the owner with the serial number and fiscal memory number.
If Result = ‘F’ and the S1.1 flag is raised the command has not been successful because either the fiscal memory
has not been formatted or the serial number has already been entered.
5CH (92) PRINT SEPARATOR LINE
Data field: <Type>
Response: None
Type The type of the separator line. One symbol with possible value:
‘1’ 48 times the symbol ‘-‘.
‘2’ 24 times the sequence ‘-‘ and ‘ ‘.
‘3’ 48 times the symbol ‘=‘.
The command prints a separator line using the full paper width. Permitted in a fiscal or non-fiscal receipt only,
To Next Page
Loading...
