Datecs FP-2000 - Page 22

Fiscal Printer DATECS FP-2000 Version 3.10
5EH (94) DETAILED FISCAL MEMORY REPORT BY CLOSURE DATE
Data field: <Start>,<End>
or
<Period>
Response: None
Start The starting date of the selected fiscal entry - 6 bytes DDMMYY
End Ending date of the fiscal entry - 6 bytes DDMMYY
Period Used to print monthly or annual periodical report.
For monthly report – 4 bytes expected with format MMYY
For annual report – 2 bytes expected with format YY.
This command prints out a detailed financial report on the period between two selected dates or on the selected
month or year.
5FH (95) SHORT FISCAL MEMORY REPORT BY CLOSURE NUMBER
Data field: <Start>,<End>
Response: None
Start Starting number of the fiscal entry
End End number of fiscal entry
The command starts the calculation and the printing of a short periodic financial report.
61H (97) READING THE SET TAX RATES
Data field: None
Response: TaxB,TaxC,TaxD,TaxE,TaxF,TaxG,TaxH,TaxI
TaxB Current tax rate B
TaxC Current tax rate C
TaxD Current tax rate D
TaxE Current tax rate E
TaxF Current tax rate F
TaxG Current tax rate G
TaxH Current tax rate H
TaxI Current tax rate I
62H (98) SETTING THE TAX REGISTRATION NUMBER
Data field: <TaxNo>
Response: None
TaxNo The tax registration number as a text (from 8 to 14 bytes).
The command changes the tax registration. Before fiscalization this data are hold in RAM only, so they can be
changed unlimited times.
The fiscalization writes the current data set using this command to the fiscal memory.
63H (99) READING THE TAX REGISTRATION NUMBER
Data field: None
Response: TaxNo
TaxNot The tax registration number as a text.
64H (100) SHOWING TEXT ON DISPLAY
Data field: Text
Response: None