FP-550F 17
FUNCTION MODES OF THE FISCAL DEVICE
The fiscal device has two functional modes:
1. The tutorial mode. The device is not fiscalized and all data needed for its
normal functioning are entered and saved in the fiscal memory with the exception of
the tax registration number of the owner. Clients receipts and be opened and closed but
they always bear the inscription that they are not fiscal. Daily financial reports with
clearing can be generated but they are not saved in the fiscal memory.
2. Normal mode. The device has been fiscalized and the tax registration number
of the owner is saved in the fiscal memory. Al fiscal rules apply.
STATUS OF THE FISCAL DEVICE
The status of the fiscal device can differ. Shifting from one to another condition is not
always possible. The control of the printer and the shifting between the different
functions - when this is possible - is executed by the application program Host (PC),
which must relate to the included protocol. If this protocol is not applied correctly the
printer might enter into an undesirable status or to skip a given functional status, leading
to an ERROR.
A) Initial status
This is the functional status in which the date and the hour are set, the number of the
fiscal memory is entered as well as the serial number and the code of the country where
the device will be operated.
THE ABOVE-DESCRIBED OPERATIONS ARE PERFORMED
PRIOR TO SELLING THE DEVICE TO THE CLIENT ONLY
BY AN AUTHORISED SERVICE SPECIALIST!
The following commands must be performed in the order in which they are presented:
61(3DH) and 91(5BH).
B) Status after the formatting of the fiscal memory.
This is the state in which the name of the currency is entered, the number of the digits
after the decimal point and the tax rates.
After performing these operations the fiscal printer is ready for delivery to the future
To Next Page
Loading...
