40 FP-550F
25
Sw The keys from Sw1 to Sw4 - a 4 bytes string with ‘0’ or ‘1’.
Country The number of the country - 1 byte
Ser The serial number - 8 bytes
FM Number of the fiscal module - 8 bytes.
5Bh (91) PROGRAMMING THE SERIAL NUMBER OF THE FISCAL PRINTER,
THE NUMBER OF THE COUNTRY AND THE FISCAL MODULE
Data field: Country, Serial, FM number
Response: Result, CountryStr
Country: One byte designating the country, where the printer is operated. For ex-
ample “BULGARIA”.
The command IS NOT INCLUDED in the software program package and can be per-
formed only by the manufacturer of the printer. The printer is handed over to the owner
with the name of the country, serial number and fiscal memory number.
If Result = F and the S1.1 flag is raised the command has not been successful because
either the fiscal memory has not been formatted or the serial number has already been
entered.
5Eh (94) PRINTING OUT THE FISCAL MEMORY ACCORDING TO THE DATE
OF THE FISCAL ENTRY
Data field: <Start><End>
Response: None
Start The starting date of the selected fiscal entry - 6 bytes DDMMYY
End Ending date of the fiscal entry - 6 bytes DDMMYY
This command prints out a detailed financial report on the period between two selected
dates.
5Fh (95) SUMS ACCUMULATED IN THE FISCAL MEMORY FOR A GIVEN
PERIOD OF TIME
Data field: <Start><End>
Response: None
Start Starting number of the fiscal entry
End End number of fiscal entry
The command starts the calculation and the printing of a short periodic financial re-
port.
60h (96) SETTING TAX RATES
Data field: <TaxA><TaxB><TaxC><TaxD>
Response: Result
TaxA A variable digit with two symbols after the decimal point
TaxB A variable digit with two symbols after the decimal point
TaxC A variable digit with two symbols after the decimal point
TaxD A variable digit with two symbols after the decimal point
To Next Page
Loading...
