42 FP-550F
OpName Name of the operator (up to 24 symbols)
Enters one of the eight operator names. The number and the name of the operator are
printed at the beginning of each fiscal (clients) receipt. After three erroneous pass-
word entries the printer will block, it must then be switched OFF and ON again to
continue operating. After initialization or closure of the operational memory all eight
passwords locations are empty.
67h (103) INFORMATION ON THE CURRENT RECEIPT
Data field: None
Response: CanVd, TaxA, TaxB, TaxC, TaxD, Inv, InvNmb
CanVd: Possible/impossible return (sale registration with a negative sign) [0/1]
TaxA: The sum accumulated under tax A
TaxB: The sum accumulated under tax B
TaxC: The sum accumulated under tax C
TaxD: The sum accumulated under tax D
Inv: Is there a clients invoice opened ?
Inv/Nmb: The number of the next invoice.
The command offers information on sums accumulated so far under the different tax
groups and whether it is possible to return the registered items sold.
68h (104) CLEARING THE OPERATOR’S DATA
Data field: <Operator> <Password>
Response: None
Operator The operator’s number
Password Password (4 to 6 digits)
Clears the accumulated information from the sales performed by the selected opera-
tor. The command will be canceled at the entry of an incorrect password.
68h (105) OPERATOR’S REPORT
Data field: None
Response: None
Information on the sales, performed by the operators, is printed out where for each
separate operator the following data is printed out: name, individual number, number
of fiscal receipts, discharges made, surcharge, sum adjustments and accumulated
total sums.
6Ah (106) DRAWER KICK OUT
Data field: [<mSec>]
Response: None
mSec The length of the impulse in milliseconds (5-25)
Sends an impulse for opening the cash drawer. This parameter sets a new value for
To Next Page
Loading...
