FP-550F 5
GENERAL DESCRIPTION OF THE FP-550F
Control panel
The functional control of the printer is performed with the help of buttons, located on
its frontal part and commands, sent via the serial interface. The coupling of the cable
connections are located in such a way as to make them easily connectable and the
whole device fast to set up for normal operation. The pruinting devices are of the low
sopund emission, fast operating type - 50 mm/sec.
The printer has an automatic paper cutter. It can support a display and a cash drawer.
Prior to using this device please read these instructions and the descriptions of the
application programs carefully and make sure that you have really learned how to op-
erate the FP-550F.
Upon delivery, the DATECS package will contain:
-Paper rolls - 2 pieces;
-AC-DC adapter;
- Serial cable for connecting to a PC;
- User’s Manual;
- Instructions for the taxation authorities;
- Passport of the device.
Rear cover
Window for journal report paper strip
Control panel
ON/OFF switch
Magnetic tray
Front cover
Coin tray
To Next Page
Loading...
