Datecs LP-1000 - 2. Basic Rules for Operating; Follow Instructions Closely

User’s Manual1 DATECS LP-1000
14 15
• Attempts to print on other types of paper, stickers, folio not specified as
acceptable in this MANUAL may seriously damage your printer.
• Do not spill liquids of any kind on the device.
• Print only on specified thermal paper-rolls.
• Don’t force paper out from the printing mechanism.
• Should the printer behave unusually during operation immediately turn
it off!
• Printer repairs are performed only by service technicians. Do not at
tempt to repair the unit yourself.
2. Basic rules for operating
The printer operates with paper rolls with sizes:
• roll with labels: width 58 mm or 79 mm
• maximum diameter of roll: 83 mm
1.2 Unpacking
When unpacking the package, confirm that the following parts are provided:
 Printer body ...................... 1 unit
 Sample paper roll ............ 1 roll
 AC adapter ....................... 1 piece
 User’s manual .................. 1 copy
 Disc ................................... 1 piece
CAUTION
 Install the printer body on a flat and stable desk or mount it onto
the wall, etc., using a hook, etc.
 Do not install the printer near a heater or in a place exposed to
the direct sunshine.
 Do not use the printer in a high-temperature, high-humidity, or
contaminated environment.
 Do not allow dew condensation to form on the printer. If such
condensation should form, do not turn on the power until it has
completely gone away.
 Use only the accessory DC/AC adapter. Do not use it for an
other purpose.
 If you do not use the printer for a long period, disconnect the
power cable from the socket.
 Keep this manual carefully at hand for ready reference.
!
!
CAUTION
!
!
FOLLOW INSTRUCTIONS CLOSELY.
MAY CAUSE DAMAGE TO THE UNIT.