1-4 TW7000 Variations
Note: Specifications are subject to change without notice or obliga-
tion.
TW7000 Variations
This manual includes the information necessary to operate any varia-
tions of the TW7000. Options described in this manual may not be
available on your transceiver. For more information about TW7000
variation, contact DWC.
TW7000C: The TW7000C is designed for computer control. The
standard front panel is replaced with a blank front panel.
TW7000E: The TW7000E is designed for extended control. The
standard front panel is replaced with a line driver panel. For remote
operation up to 15m (50 ft.), use with TW7201E control head.
TW7000PP: The TW7000PP has connections that allow the TW5830
Pre/Postselector and TW5830INST Installation Kit to be added for co-
sited operation.
Note: The TW5830 requires the radio have both the TW7000PP and
the TW5830INST. The TW7000 cannot be upgraded to a TW7000PP
in the field.
TW7000RF: The TW7000RF is designed for long distance (beyond
2 km) remote-only control. The standard front panel is replaced with a
blank front panel. An internal modem card (7000RF) is installed. For
full function FSK remote control, use with a TW7201F.
TW7000RI: The TW7000RI is designed for remote-only control up
to 2 km. The standard front panel is replaced with a blank front panel.
An internal modem card (7000RI) is installed. For full function, real
time, ISDN remote control, use with a TW7201I.
TW7000RX: The TW7000RX is a receiver only. It includes the full
receiver functions of the TW7000, excluding the transmit features.
Storage
Temperature
-40° to +70°C
Shock and
Vibration
Per MIL-STD-810E
Table 1-1
TW7000 Technical Specifications
Characteristic Specification
To Next Page
Loading...
