Datron TW7000 - Page 45

Operation 3-17
Example: To change the frequency of channel 041 from
13.330,000 MHz to 8.572,000 MHz:
1. Press C, 041,andE.
Display: CH FREQ
041 13.330,000 MHz
Rx
2. Press F, 8.572,andE.
Display: CH FREQ
041 8.572,000 MHz
Rx
Assigning Semi-duplex Frequencies
To select the channel and assign a new frequency:
1. Press C, enter the 3-digit channel number, and press E.
2. Press F.
Display: xx. xxx, xxx
Rx
3. Enter the receive frequency and press E.
4. Press F twice.
Display: xx. xxx, xxx
Tx
5. Enter the transmit frequency and press E. The new channel fre-
quency displays.
6. Press F to toggle between the receive and transmit frequencies.
Example: To enter an RX frequency of 21.2 MHz and a TX frequency
of 29.3 MHz on channel 041:
1. Press C, 041,andE.
Display: CH FREQ
041 xx.xxx,xxx (where xx.xxx,xxx is the
existing channel frequency)
2. Press F, 21.2,andE.
Display: 041 21.200,000
Rx
3. Press FF, 29.3,andE.