Why is my Datum DT3X360R not leveling?
If your Datum Laser Level isn't leveling, it might be outside its leveling range. Try repositioning the instrument, tripod, or the base surface. If the issue continues, the instrument may have impact damage, and you should contact a service center for repair and calibration.
What to do if my Datum DT3X360R Laser Level does not turn on?
If your Datum Laser Level isn't turning on, first ensure the batteries are correctly installed, paying attention to the polarity. If the issue persists, the batteries might be depleted; try replacing them with new ones. Also, if the laser level has been stored in high temperatures, allow it to cool down before attempting to use it.
General| IP Rating | IP54 |
|---|---|
| Battery Life | 20 hours |
| Type | Rotary Laser Level |
| Rotation Speed | 600 RPM |
| Power Source | Battery |
| Operating Temperature | -10°C to +50°C |
| Leveling Method | Electronic Self-Levelling |
| Laser Class | Class 2 |
To Next Page
