Why Datum Laser Level does not turn on?
Your Datum Laser Level might not be turning on because the batteries are low, depleted, or not installed correctly. Ensure the batteries are in good working condition; if unsure, replace them with new ones, making sure to install them with the correct polarity. Also, if the laser has been stored in a hot environment, allow it to cool down before use.
What to do if my Datum DTR30R Laser Level is not leveling?
If your Datum Laser Level isn't leveling, it could be due to several reasons. First, the instrument might be outside its leveling range, so adjust its position, tripod, or base surface. Ensure the instrument is within its self-leveling range. Also, check if the instrument is in Manual Mode, as it needs to be in Automatic Mode to self-level.
Why is the laser detector on my Datum Laser Level not working properly?
If the laser detector isn't working correctly, it might be due to low battery. Replace the batteries, ensuring they are installed with the correct polarity. Another reason could be that the detector is out of usable range; try moving the detector closer to the instrument.
Why Datum Laser Level beam distance is reduced?
If the laser beam distance is reduced, try cleaning the laser output window.
Explains the meaning of danger, warning, and caution symbols used in the manual.
Lists essential safety rules for operating the laser level, including eye protection and handling.
How to turn the instrument on, its self-levelling process, and troubleshooting levelling issues.
How to set manual grades on X and Y axes and return to auto-level mode.
Instructions on powering, mounting, and using the laser detector to find the beam.
Table of common problems with the laser and their potential causes and solutions.
General| Laser Wavelength | 635 nm |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Waterproof | Yes |
| Protection Rating | IP54 |
| Working Range | 30m |
| Accuracy | ±1.5mm at 30m |
| Rotation Speed | 600 rpm |
| Power Supply | 4 x AA batteries |
| Operating Time | 20 hours |
To Next Page
