To Next PageTo Next Page
Need help?Do you have a question about the Davey Nipper DNP15C and is the answer not in the manual?
General| Brand | Davey |
|---|---|
| Model | Nipper DNP15C |
| Category | Swimming Pool Filter |
| Language | English |
Ensure correct salt levels for optimal performance and cell life.
Inspect and clean the cell regularly to prevent scale build-up and damage.
Maintain correct pH, alkalinity, and hardness for equipment protection and effective chlorination.
Select a suitable location and mount the power supply vertically. Ensure proper ventilation.
Install the cell as the last appliance in the system, ensuring laminar water flow.
Configure the operating language of the control panel.
Set the start time for Timer 1 operation.
Set the start time for Timer 2 operation.
Set the preferred time format (12-hour or 24-hour).
Set the stop time for Timer 1 operation.
Set the stop time for Timer 2 operation.
Adjust the percentage of time the cell produces chlorine.
Set the start time for Timer 1.
Increases cell duty cycle to 100% for 24 hours for super-chlorination.
Instructions to turn on BOOST MODE and its effect.
Alarm triggered by critically low salt levels, disabling the unit.
Step-by-step guide for cleaning the electrolytic cell.
Recommended salt levels for different models and warnings.
