2
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation
and Operating Instructions. Read these in their entirety before switching on this
pump. If you are uncertain as to any of these Installation and Operating Instructions
please contact your Davey dealer or the appropriate Davey ofce as listed on the
back of this document.
Your Davey QB Series
Congratulations on your purchase of a quality product from the Davey range of
Pool and Spa Equipment. You are assured of many years of reliable and efcient
performance from your Davey QB Series backed by Davey’s two year guarantee.
Davey QB Series have been designed to circulate swimming pool and spa water in
conditions set out in the Australian Standard for swimming pool water quality (AS
3633) or equivalent. They should not be used for any other purpose without rst
consulting your Davey Dealer or the Davey Customer Service Centre.
The matched motor and “pumping end” are designed to provide dependable
operation while delivering maximum water ow.
Every Davey QB Series is thoroughly tested during manufacture.
Location
The pump should be located as close to the water as practicable and mounted on
a rm base in a well drained position, high enough to prevent any ooding. It is the
installer’s/owners responsibility to locate the pump such that the nameplate can be
easily read and accessed for service.
Installation Diagram
Weather Protection
It is recommended that the pump is protected from the weather.
To Next Page
Need help?
General
