Davey RainBank KRB1NF - User Manual

P/N 402330
AUSTRALIA
Davey Support Centre
6 Lakeview Drive,
Scoresby, Australia 3179
Ph: 1300 367 866
Fax: 1300 369 119
Website: davey.com.au
Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517
NEW ZEALAND
Davey Support Centre
7 Rockridge Avenue,
Penrose, Auckland 1061
Ph: 0800 654 333
Fax: 09 527 7654
Website: daveynz.co.nz
® Davey and RainBank are registered trademarks of Davey Water Products Pty Ltd.
© Davey Water Products Pty Ltd 2014.
Floatless RainBank
®
(FL)
KRB1NF & KRB2NF
Set-up Instructions
2009 WINNER
ATS 5200.446 Lic WMKA 22042

Summary

Floatless RainBank Set-up Instructions

Correct Installation Principles

Ensure pump is positioned below discharge point and water level for optimal function and priming.

Common Installation Errors

Avoid incorrect setups like lifting water from an in-ground tank or placing the pump higher than the water level.

Troubleshooting and Issue Resolution

Fix pump priming issues by adjusting installation height and fitting a Davey Float Switch.

Davey RainBank KRB1NF Specifications

General

Model	KRB1NF
Category	Water Pump
Brand	Davey
Product Name	RainBank KRB1NF
Maximum Water Temperature	40°C
Voltage	230-240V
Inlet Size	1 inch BSP
Pump Compatibility	Compatible with most pressure pumps
Outlet Size	1 inch BSP