ü
✘
✘
Save time, save a call back
Experts in water.
Here is how to
get it right…
Finally…
Like this…
Why?
Not like this…
Or this…
Make sure the top of the
pump is LOWER than the
discharge point.
TIP: This is easier if you have your pump
and Rainbank close to the tank.
If you are encountering issues with your system how can you fix it?
1. Modify the installation so that top of the pump is below lowest water level
2. Fit and adjust a Davey Float Switch. (P/N 13961)
Refer to the full installation & operating instructions for advice on how to t
an external oat switch.
Tank water level is higher than top
of the pump.
Air gets trapped and can’t be
released. Pump loses prime
and cannot pump water until
reprimed.
Trying to lift
water from an
in-ground
tank.
Pump is higher than
the lowest level of the
water in the tank.
ate
o Toilets
and Laundry
W
IMPORTANT:
For trouble free function you MUST
set up your RainBank in accordance
with these instructions.
To Previous Page
Loading...
Need help?
General
