Davey SJ35-04 - Choosing a Site; Housing your Garden Series Jet Pump

~ 2 ~
Congratulations on your purchase of a Garden Series quality pressure pump or water pressure system. All components
have been designed and manufactured to give trouble free, reliable operation.
Before installing your new pump, please read all instructions carefully as failures caused by incorrect installation or
operation are not covered by the guarantee. Your Garden Series Jet Pump is designed to handle clean water. The pump
should not be used for any other purpose without specic referral to Davey. The use of the pump to handle ammable,
corrosive and other materials of a hazardous nature is specically excluded.
Model SJ35-04
1. Delivery outlet - 1” BSP(F)
2. Suction inlet - 1” BSP(F)
3. Pump body
4. Motor
5. Priming port and plug
6. Drain port and plug
Model SJ35-04PC & SJ60-08PC
1. Delivery outlet - 1” BSP(M)
2. Suction inlet
– SJ35-04PC - 1”BSP(F)
– SJ60-08PC - 1
1
/
4
”BSP(F)
3. Pump body
4. Motor
5. Priming port and plug
6. Drain port and plug
7. Pressure controller
Do not use this pump to pump ammable uids, such as petrol or diesel fuels.
Choosing a Site
Choose a site with a rm base and as close to the water source as possible with
correct power supply. Make sure your pump is always connected to an adequate,
reliable source of clean water.
Housing your Garden Series Jet Pump
To protect your pump from the weather, make sure the cover provided is water proof,
frost free and has adequate ventilation.
The pump should be horizontally mounted on a rm base allowing for drainage, to
avoid damage to ooring etc., that over time may occur from leaking pipe joints or
pump seals. Do not mount the pump vertically.
WARNING: Some insects, such as small ants, nd electrical devices attractive for various reasons. If your pump
enclosure is susceptible to insect infestation you should implement a suitable pest control plan.