DAVIS Vantage Pro2 - USB Connection; Serial Port Connection

DEW HEAT
Press 2
ND
& DEW to display:
• Dew Point (°F, °C)
Press 2
ND
& UNITS to change unit of measure.
All temperature-related readings (inside and outside temperature, wind
chill, heat index, and dew point) will read in the same unit of measure.
Changing one from °F to °C (or vice versa) changes all others.
Press 2
ND
& HEAT to toggle between:
• Heat Index (°F, °C)
• THSW (Temp-Hum-Wind-Sun) Index (°F, °C) if you have solar radia-
tion sensor.
Press 2
ND
& UNITS to change unit of measure.
All temperature-related readings (inside and outside temperature, wind
chill, heat index, and dew point) will read in the same unit of measure.
Changing one from °F to °C (or vice versa) changes all others.
On the ticker tape:
HEAT INDEX WARNING . . . will appear on the ticker tape when you
are displaying heat index if the reading is >=90°F (32°C).
14 19