Need help?Do you have a question about the DAVIS Vantage Vue Console and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Backlight | Yes |
| Update Interval | 2.5 seconds |
| Data Logger | Yes |
| Connectivity | Wireless |
| Wireless Range | 1000 feet (300 meters) |
| Power Source | AC adapter or batteries |
| Battery Life | Up to 12 months |
| Operating Temperature | 32 to 140°F (0 to 60°C) |
| Humidity Range | 1 to 100% |
| Wind Speed Measurement | 0 to 150 mph (0 to 241 km/h) |
| Compatibility | WeatherLink |
| Weather Parameters Displayed | Temperature, Humidity, Wind Speed, Wind Direction, Rainfall, Barometric Pressure |
| Weight | 1.5 lbs |
Explains the various readings and icons on the console's main screen.
Shows current time, date, sunrise, and sunset times.
Illustrates and describes weather forecast icons displayed on the console.
Shows and explains the different moon phase icons.
Details icons for alarms, transmission status, and graph mode.
Instructions on how to access and move through console setup menus.
Configuration for time, date, time zones, and geographical location.
Settings for active transmitters, retransmission, and sensor types.
Configuration for wind cup options, rain collector, and system parameters.
How to adjust the console backlight for AC and battery power.
Viewing and changing units for temperature and humidity readings.
Viewing wind speed and direction, and changing units.
Accessing current rate, daily, monthly, and yearly rainfall totals.
Viewing barometric pressure and understanding trend arrows.
How to access secondary functions and change console contrast.
Accessing Heat Index, Dew Point, and Wind Chill.
Optional ET measurements requiring specific sensors.
Navigating through detailed weather information screens.
Viewing historical weather data in graphical format.
Displaying and scrolling through historical high and low values.
Viewing and managing time-related information.
Instructions for clearing HIGH/LOW data and alarms.
Steps to configure specific weather condition alarms.
How to silence triggered alarms and clear all alarm settings.
Process for entering or modifying alarm and calibration settings.
Switching units for temperature, rain, ET, and other parameters.
Procedure to access the console's main setup menu.
Overview of statistical data related to sensor performance.
Details on signal strength, reception quality, and battery voltage.
To Next Page