NOTICE!
When the bulbs of the device
malfunction, switch off the cir-
cuit breaker and unplug the
device's power plug from the
socket. Replace the defective
bulbs immediately (leave bulbs
to cool down first), in order to
protect the remaining bulbs
against overloading.
CAUTION!
Accessible components might
be heated when used with
cooking devices.
DANGER!
Air outlet pipe of this appliance
mustn't be connected in the flue
used to discharge the fume
generated by devices that use
gas or other fuels.
Damage reasons
CAUTION!
Damage hazard due to corro-
sion. Always run the appliance
to prevent condensate forma-
tion while cooking. Conden-
sates may cause corrosion
damage. Replace the malfunc-
tioning lamp right away to pre-
vent overloading of other
lamps. Moisture intrusion in
electronic parts poses a risk of
damage. Never clean the con-
trol elements with a wet cloth.
The surface could be damaged
due to a wrong cleaning
process. Clean stainless steel
surfaces only in their brushing
direction. Do not use a stain-
less steel cleaner for the control
elements. The surface could be
damaged due to aggressive
and abrasive cleaning agents.
Never use aggressive and
abrasive cleaning agents.
There is a risk of damage due
to condensate liquid backflow.
Install the air exit canal with a
small downward inclination (1°
inclination) from the appliance.
WARNING AND SAFETY PRECAUTIONS
Life-Threatening Danger, Poisoning Danger!
12.08.2020
User Manual
12
To Next Page
Loading...
