11 REPLACING THE LAMPS
11.1 Halogen Lamp
Replacement
WARNING!
Disconnect the electrical supply
of the hood. Leave the lamps to
cool down first because they
could burn your hands when
they are hot.
It indicates the maximum power con-
sumption of the lamp. A lamp with
same power rating should be used
when replacing the lamp.
To find out the power rating
used in the product, see the
declaration label in the product.
Fig. 16: Halogen lamp symbol
Only self-protection tungsten halogen
lamp or self-protection metal halide
lamp must be used.
Fig. 17: Halogen Lamp Replacement
For replacing the halogen lamps, push
downwards on the lamp holder from its
behind, turn it a little bit counter-clock-
wise, and take it out down-
wards.Fig. 17
REPLACING THE LAMPS
Halogen Lamp Replacement
12.08.2020
User Manual
25
To Next Page
Loading...
