14
When the ride is over or the battery is running low, charge
the battery immediately. This will help maximise it’s useable
life.
There are two ways to charge the battery:
1. Uninstall from the bike to charge it separately
2. Charge it directly without uninstalling it from the bike;
• Attach the charger connector charge slot located on
the battery, and the AC connector to a 230V power
source with the supplied UK plug.
• There is an LED indicator on the battery charger unit.
When the power is connected and the battery is charg-
ing, the LED indicator turns red. When the LED indica-
tor turns green, it means the battery is fully charged.
Li-ION recommended charge time: 3-5 hours
Do not charge continuously for more than 8 hours at
any one time.
After charging, unplug the input socket rst (from the
outlet), then unplug the output socket (from the bike).
The battery charger must have constant voltage.
Fluctuating voltage or uctuating power supply of any kind
may damage the battery storage cells so avoid charging
from a generator or o grid solar/wind source.
Getting Started: Battery Charging
Charging Port
Fig I - Battery Pack Switch and Charging Port
To Next Page