MIRcat OPERATION
•
D11-00028-02-A Page 37 of 54
Multi-spectral Mode
This mode allows the user to enter data on what wavelength or wavenumber the laser is going to scan to,
dwell with laser ON, then move to the next command. The user can store up to 20 different parameters,
such as Wavelength, Dwell time, and Laser Off time. The trigger modes available are Internal or External
Modes and are set in the Setting menu.
The user can program a scan sequence by adding or removing lines by selecting the row and entering the
data.
To Next Page
Loading...