Daymak Boomerbuggy X Pro - RADIO DISPLAY DETAILS

29
radio display
When you select the Radio opon either by choosing it from the menu screen or
pressing the MOD buon, you will see a screen like this. Here is what everything
means on this screen.
1) Staon Preset - These are generic presets that you can switch to by pressing Next /
Previous( / ) select buons. Press the Select ( )buon to choose it.
2) Current Staon - This needle shows exactly what staon is being tuned into. To move
this up or down, press AND hold, the Next / Previous ( / ) select buons
respecvely.
3) Volume - This shows the current volume playing. Full volume reads 30 and completely
muted is 0. Change this by pressing the volume up and down buons ( - / + ).
4) Time - Shows the current me. To change the me see Date / Time in the sengs
menu.
5) Bluetooth Connecon - Shows if there is a device that is currently connected to this
machine. To connect to it via Bluetooth see Bluetooth / Radio / Backup Display Secon
6) Staon - Shows the current staon as an integer.