Daymak Tofino X - Display

20
1) Power button - Press and hold this button to turn on and o the unit. Press it quickly to
switch the display from Odometer / Trip Meter / Voltage
2) S+ - Press this to increase the level of pedal assist press and hold this to engage walk
mode and this makes the bike go at 4 km/h
3) CUR - Press this to turn on and o the lights. Press and hold this to engage the Cruise
Control (must be enabled)
4) S- - Press this to decrease the level
5) Horn - Press this to honk the horn
6) Pedal Assist Level - This shows the amount of assitance the bike will automatically
provide you as you pedal up to 5 levels. 1 provides the least amount of assistance and 5
provides the most.
7) Odometer / Trip Meteter / Voltage - Shows the distance travelled or the voltage of the
bike (switch this by pressing the power button quickly.
8) Speedometer - Shows your current speed
9) Battery Meter - Shows how much you battery power you have left up to 6 bars, 6 being
full power.
10) Motor power - Shows how much power your motor is currently drawing from your
unit.
Display
Below you will nd the display of the Tono X. These are what each function does or
displays.