9
Warning
When you acvate the e-bike, the electrical system becomes live. Do not try to aect
changes to the E-Bike (such as removing the baery or repairing electrical components)
while the E-Bike is acvated. Turn the E-Bike o and remove the key before you aempt
to access any of the electrical components. Also, the baery carries a signicant electric
charge and can injure people if not treated properly and with respect.
Accelerating and Decelerating
The throle is found on the right-side hand grip on the handlebars. Turn rotate the grip
counterclockwise (towards you) to accelerate. To decelerate, release the grip (turn it
away from you). Don’t over-rotate the accelerator, as this could damage the baery and
electrical components.
Warning
Do not acvate the accelerator unl you are seated on the bicycle and are ready to
accelerate. The e-bike can easily escape from your control, possibly injuring you or others,
and the e-bike may be damaged by being dropped.
Stopping
Your e-bike has two sets of brakes, at the front and at the rear. The levers aached to
the handlebars, on the le and right, acvate the brakes. Pull the levers toward you to
acvate the brakes.
You can use both brakes to come to a stop more quickly, or you can use one of the brakes
to come to a gentle stop, depending on your riding needs at the moment. When the
brakes are acvated, the power to the engine is automacally turned o, unl you release
the brakes. This allows you to stop safely.
Safety Tips
• When you are traveling in wet weather, water may cause your brakes to funcon
less eciently because it reduces fricon between the brake pads and the wheels.
• Take care to slow down and give yourself more room to stop or slow if necessary.
• It is a good idea to have your brakes and brake pads checked regularly. The brake
pads will eventually wear down through fricon, and aer signicant use will have to
be replaced.
• Engage the rear brakes rst before the front brakes to avoid ipping the unit.
To Next Page
Loading...
Need help?
General
